FEATURES
· Handles pathological pattern
· Automatic cable equalization to ensure signal integrity
· Automatic reclocking 270Mbit/s - 1.48Gbit/s - 3Gbit/s
· Support signal type: 270Mbit/s to 3Gbit/s according to SMPTE
424M, SMPTE 292M and SMPTE 259M standards
·Directly compatible with HD-SDI camera systems and support RS-232,
RS-422, and RS-485 data protocols
· Long transmission capability at least 10 km(6.2 miles) , up to 80
km
· Terminal block power input for industrial application
·Supports hot swapping and hot plugging
·Industry-grade of operating temperature from -10℃to 75℃ , which is
applied to the different working environment
·Stand-alone type or card-type installed in 19’’ 4U rack-mount
chassis.
DESCRIPTION
The SDI series fiber video converter is an ideal and economic
solution for broadcasting or surveillance applications. It receives
one SDI electrical input, perfectly converts electrical SDI signal
to single mode optic SDI signal. It supports transmission image of
SDTV (143-540Mbps), HDTV (1.485Gbps) and HDTV (3Gbps, 1080p60).
Both transmitter and receiver provide equalizing and reclocking at
input unit in order to re-construct the signal for consistent
quality. Besides, with BeyondOpto advanced fiber technology, The
converter can easily pass pathological pattern to prove its
complete transmission.
The SDI series fiber video converter are typically used in
applications where the cameras have P/T/Z capabilities. Plug and
Play design ensures the ease of installation and operation.
Electronic and optical adjustments are never required. LED
indicators are provided for instantly monitoring system status.
Devices are available for either standalone or rack-mount
installation ,which is suitable for different working environment .
SPECIFICATION
Opitcal:
Wavelength | 1310nm&1470nm~1610nm |
Output Power | -8~-3dBm / -3~+2dBm |
Optic fiber | 50/125u multimode,62.5/125u multimode,9/125u single mode |
Rx sensitivity | -18dBm |
Optical connector | LC,SC,FC,ST (optional) |
Distance | 0~350M (MM) / 0~80KM (SM) |
Remote:
Data protocol | RS232,RS422,RS485 |
Data rate | 0~500 Kbps |
Error rate | < 10-9 |
Connector | Standard terminal lead |
Video:
SDI Input |
Signal Type SDI | SMPTE 424M, SMPTE 292M, SMPTE 259M |
Data Rates | 270Mbit/s - 1.48Gbit/s - 3Gbit/s |
Cable Equalization | Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
Connector | BNC 75 Ohm |
General: |
Input Power | 5 V or 12V DC |
Operating temperature | 0°C to 55°C |
Storage temperature | -10°C to 70°C |
Operating humidity | 0 ~ 95% (non-condensing) |
Case material | Aluminum |
Ethernet:
Work mode | Full duplex/half duplex |
Data Rate | 10/100Mbps(AUTO) |
connection terminal | RJ45 |
Control | SNMP |
SNMP DETAIL:
SFP1 |
SFP Mount Status |
| SFP RX1 Temperature |
|
Dual Receiver Video SFP |
| SFP RX1 Power |
|
Connector |
| SFP RX1 Voltage |
|
Fiber Length(9um*km) |
|
|
|
Vendor name |
|
|
|
Vendor part number |
|
|
|
Wavelenght |
|
|
|
Vendor serial number |
|
|
|
Vendor date code |
|
|
|
SFP2 |
SFP Mount Status |
| SFP RX2 Temperature |
|
Dual Receiver Video SFP |
| SFP RX2 Power |
|
Connector |
| SFP RX2 Voltage |
|
Fiber Length(9um*km) |
|
|
|
Vendor name |
|
|
|
Vendor part number |
|
|
|
Wavelenght |
|
|
|
Vendor serial number |
|
|
|
Vendor date code |
|
|
|
SFP3 |
SFP Mount Status |
| SFP RX3 Temperature |
|
Dual Receiver Video SFP |
| SFP RX3 Power |
|
Connector |
| SFP RX3 Voltage |
|
Fiber Length(9um*km) |
|
|
|
Vendor name |
|
|
|
Vendor part number |
|
|
|
Wavelenght |
|
|
|
Vendor serial number |
|
|
|
Vendor date code |
|
|
|
SFP4 |
SFP Mount Status |
| SFP RX4 Temperature |
|
Dual Receiver Video SFP |
| SFP RX4 Power |
|
Connector |
| SFP RX4 Voltage |
|
Fiber Length(9um*km) |
|
|
|
Vendor name |
|
|
|
Vendor part number |
|
|
|
Wavelenght |
|
|
|
Vendor serial number |
|
|
|
Vendor date code |
|
|
|
APPLICATION
