Simple introduction:
USB 3.0 To Fiber Optic Extender, also called USB3.0 To Fiber
Converter. The device includes a transmitter(client-side) and a
receiver(host-side), which can extend the SuperSpeed USB3.0 to a
remote location over 1or 2 core fiber cable, max distance 250m (SM
or MM fiber cable).
The device can extend high bandwidth USB 3.0 webcams and storage
devices ,be widely used in military command and control system,
police command and control system, traffic management system,
energy and electricity supply industry, government office, medical
system, commercial presentation, multimedia and public utilities
etc.
Product feature:
1, Max extension distance 250m (SM or MM fiber cable).
2, Duplex/Single LC fiber connecter, pure hardware design, no
driver needed, compatible with all operation systems, support plug
and play
3, Support USB3.0 SuperSpeed up to 5Gbps, USB 3.0 Type A Receptacle
4, Not backwards compatible with USB 2.0 and USB 1.1
an';font-size:10.5000pt;mso-font-kerning:1.0000pt;" > core fiber
cable, max distance 250m (SM or MM fiber cable).
The device can extend high bandwidth USB 3.0 webcams and storage
devices ,be widely used in military command and control system,
police command and control system, traffic management system,
energy and electricity supply industry, government office, medical
system, commercial presentation, multimedia and public utilities
etc.
Product specification:
Optical | Connector | Duplex / Single LC |
Wave length | 1310nm/1550nm |
Physical | Size (L x W x H) | 104mm x 104mm x 28mm |
Case | Aluminum |
Color | Black |
N.W. | 0.75Kg |
Power | Voltage | 5V DC |
sender power consumption | < 5W |
receiver power consumption | < 5W |
Environment | Working temperature | 0-50 |
Storage temperature | -40-85 |
Humidity | 0-95% (non-condensing) |
Panel diagram:
Equipment powered sequence:
(1) Receiver(host-side)powered with the DC 5 v adapter , powered
via USB port from host PC
(2) Transmitter(client-side)powered with the DC 5 v adapter
(3)The USB3.0 device connect to the transmitter(client-side)
Note:
If the host PC does not recognize the device, you can carry out the
following operations:
1 press the the REST key of transmitter(client-side), restart the
device.
2 Click the "device manager", see "USB3.0 hub" - off "power
management" attribute in the page "allow the computer to turn off
this device to save power options;
3 Connect another USB3.0 interface of host PC.
4 uninstall the "USB3.0 hub" in the device manager, re connect.
When device is working, do not plug USB3.0 and fiber cable, so as
to avoid the equipment does not work properly.
Connection diagram:
